Friedrich ZoneAire Select PZH07K3SB handleiding

Airco

Friedrich

37 pagina's

PDF beschikbaar

Handleiding

C. INSTALLATION OF THE UNIT

C.4.2 External Drain Kit Installation

When using an external drain system, the condensate is removed

through either of two drain holes on the back of the wall sleeve. Select

the drain hole which best meets your drainage situation and install the

drain kit. Seal off the other with a cover plate.

Drain Tube Installation

1. Peel the backing tape off the gaskets and apply the sticky side

to one cover plate and one mounting plate as shown in Details

A and B.

2. Place the drain tube through the gasket and the mounting plate

with the ﬂange toward the wall sleeve.

3. Attach the drain tube assembly to one of the two drain holes at

the rear of the wall sleeve. The large ﬂange on the mounting

plate is positioned at the bottom of the sleeve facing toward the

sleeve, Detail B. When the drain tube is positioned at the desired

angle, tighten the screws.

Cover Plate Installation

4. Mount the foam gasket to the cover plate. Using two #10 x ½”

sheet metal screws (provided), attach the cover plate to the

remaining drain hole. Make certain the large ﬂange on the plate

is positioned at the bottom of the sleeve.

5. Discard the additional cover plate, gasket, machine screws, and

locknuts.

NOTICE

If the wall sleeve has not been installed, the drain tube

must be rotated to a horizontal position until after the

sleeve is installed. Tighten the mounting plate screws

when the tube is in the proper position. Make certain that

the four overflow slots at the rear of the wall sleeve are not

blocked (See Figure C.4.2).

When sealing the sleeve on the outside of the building, be

careful NOT to let the sealant block the two condensate

drain holes or the four overflow slots at the bottom flange

of the sleeve.

Potential property damage can occur if instructions are

not followed.

Figure C.4.2 (External Drain Kit Installation)

FOAM

GASKET

OVERFLOW

SLOTS

DETAIL B

DETAIL A

COVER

PLATE

FOAM

GASKET

SCREWS

½” O.D. TUBE

MOUNTING

PLATE

NUT

Bekijk gratis de handleiding van Friedrich ZoneAire Select PZH07K3SB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.