Friedrich Hazardgard SH20M30B Handleiding (90 Pagina's)

Handleiding

7

Installation Instructions

Models SH15, SH20 and SH24

NOTE: THIS MANUAL INCLUDES INSTALLATION INSTRUCTIONS FOR BOTH WINDOW MOUNT

AND THROUGH- THE WALL INSTALLATIONS

WARNING

Explosion Hazard

Electrical Shock Hazard

Electrically connect unit in accordance with NEC

Code Article 501. Failure to do so can result in

death, explosion, fire or electrical shock

Electrical Requirements

ALL FIELD WIRING MUST MEET THE REQUIREMENTS OF THE NATIONAL ELECTRICAL CODE (ANSI/NFPA

70) ARTICLE 501.

THE FIELD-PROVIDED CIRCUIT PROTECTION DEVICE (HACR CIRCUIT BREAKER OR TIME DELAY FUSE) MUST NOT EXCEED THE

AMPACITY INDICATED ON THE PRODUCT NAMEPLATE.

IMPORTANT: Before you begin the actual installation of your air conditioner, check local electrical codes and the information below.

Your power supply must be the same A.C. voltage and frequency (hertz) as marked on the name plate located on the chassis. Only

alternating current (A.C.), no direct current (D.C.), can be used.

An overloaded circuit will invariably cause malfunction or failure of the air conditioner; therefore, it is extremely important that the

electrical power is adequate. Consult your dealer or power company if in doubt.

The following instructions are for HAZARDGARD models and cabinet sizes listed below.

GROUPS CABINET SIZE (H x W X D)

SMALL CHASSIS SH15 15 15/16” x 25 15/16” x 27 3/8”

(405 mm x 660 mm x 695 mm)

MEDIUM CHASSIS SH20, SH 24 17 15/16” x 25 15/16” x 27 3/8”

(455 mm x 660 mm x 695 mm)

Model Number Plug Type Circuit Rating

Time Delay Fuse

SH15 Junction Box 250V-15 Amp

SH20, SH24 Junction Box 250V-20 Amp

Bekijk gratis de handleiding van Friedrich Hazardgard SH20M30B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.