Handleiding
Je bekijkt pagina 10 van 44
10
USING THE COOKTOP
USING THE COOKTOP (FIG. 8)
A - ON/OFF key > switch the appliance on and
o
B- Lock key > activate control panel lock / child
lock
C- Plus key > increase power level of the
cooking zone
D- Minus key > reduce power level of the cooking zone
E- Display area > shows the values set for the cooking
zone
F- Cooking Zone > select and activate the desired
cooking zone
SWITCHING THE APPLIANCE ON
Press the On-O key to switch the hob on.
All the displays relative to the cooking zones switch on in the «0» standby position. The control unit remains active for
10 seconds. If no cooking zone is selected within this time, the appliance switches o automatically.
SWITCHING A COOKING ZONE ON
Press the relative key to select the desired cooking zone and press the or key within 10 seconds to set the
power level.
The power of the single cooking zone can be adjusted in 9 dierent positions and will be shown on luminous display
B with a number from “1 to 9”.
POT DETECTION « »
If the symbol «
» should appear on one of the cooking area displays, it means that:
1) The recipient being used is not suitable for induction cooking.
2) The diameter of the recipient used is inferior to that allowed by the appliance.
3) No recipient is present.
RESIDUAL HEAT « »
If the temperature of the cooking area is still high (over 50°) after it has been switched o, the relative display will
indicate the « » symbol (residual heat). The symbol will only switch o when the burn risk in no longer present.
Bekijk gratis de handleiding van Freggia HCI43B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Freggia |
| Model | HCI43B |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 3158 MB |