Franke Maris Water Hub handleiding
Handleiding
Je bekijkt pagina 12 van 121
12
Selection of neutral LED intensity
After 60 seconds of not using the tap it will
switch automatically into the sleeping mode
status, 50% LED intensity.
To change the sleeping mode setting you have
to follow the below instruction.
1. Activate the tap by pressing the electronic
knob once.
2. Press the electronic knob 5 times.
3. The LED start ashing.
4. Turn the knob to the preferred setting by
turning the knob front or backwards:
1. 50% intensity, default,
2. 10% intensity,
3. Switched o fully.
5. After the selection press the electronic knob
for 2 seconds to conrm. The tap ashes
3 times for conrmation.
Troubleshooting
Boiler messages
LED colour LED action Description
Blue Blinking Boiler does not have water.
Blue Steady Commissioning/system self-check.
Orange Blinking System failure; contact Franke service.
Red Blinking Boiler is heating up.
Red Steady Boiler is fully heated.
Tap messages
LED colour LED action Function Description
Red Steady Boiling water Selection of boiling water is possible.
Red Rotating
Selection of boiling water
is ongoing.
Selection of boiling water is ongoing.
Orange Steady Filter
Filter cartridge is almost nished and must be
replaced within one month.
Orange Pulsating Filter
Filter has been used up and needs to be
replaced direct.
EN
Bekijk gratis de handleiding van Franke Maris Water Hub, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Franke |
| Model | Maris Water Hub |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15005 MB |
