Franke Maris Water Hub handleiding

121 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 11 van 121
11
Hold the object to be lled close to the tap
so that the object surrounds the delivery
opening of the tap. This will prevent (hot)
water from splashing.
For the optimum result when making coee
or tea, allow around 1 cup of water to run out
before using the tap. In this way the air
bubbles in the water disappear so that no
foam forms on the surface of the tea.
Filling mode
Press 2x briey for Pan lling.
Pan lling: Boiling water (red) = 30 sec. ow
Press 3x briey for Pan lling.
Pan lling: Boiling water (red) = 60 sec. ow
Filter operation and replacement
1. Press and hold the electronic knob (in the
neutral positioning) for 10 seconds.
2. Turn the electronic knob backwards to
select the correct colour from the table on
next page, based on the water hardness in
your area. Press and hold the electronic
knob for 2 seconds. The LED ash 3 times
for conrmation and go back in to the neutral
position.
The LED in the neutral position reminds you
1 month in advance that the lter needs to be
replaced. The LED in the neutral mode switch
from white to orange.
If the lter reached the expire date the orange
LED starts to pulsate until the lter has been
replaced.
Slowly turn the used lter from the lterhead.
During this process, the water supply line is
hydraulically disconnected from the lter head
and the system is depressurised; it may happen
that pressure peaks, a small amount of pressure-
relief water may escape from the lter head.
Please note this and place an appropriate
container underneath.
After the lter replacement, repeat step 1 and 2.
If you registered your system you will get a
reminder via email.
The use of a Franke lter is mandatory to
protect the product against lime scale deposits.
It is mandatory to change the lter based on the
water hardness table.
Water hardness LED colour
<10°dh light blue
10-15°dh yellow
15-20°dh light green
>20°dh purple
Filter ushing
After 1 week stagnation 2 litres
After 2 weeks stagnation 10 litres
After 8 weeks stagnation
The lter must be
replaced.
Water hardness Filter lifetime
<10°dH* 12 months
10-15°dH 10 months
15-20°dH 8 months
>20°dH 6 months
* default setting
EN

Bekijk gratis de handleiding van Franke Maris Water Hub, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkFranke
ModelMaris Water Hub
CategorieNiet gecategoriseerd
TaalNederlands
Grootte15005 MB