Handleiding
Je bekijkt pagina 26 van 200
Timer (generic)
Timer with alarm for generic use.
To enable: switch on the hob making sure there are no pans or active cooking areas.
The 3 digits to control the timer show “- - -”.
Press the digit to access the timer menu and display “0 0 0”.
Press “+” or “-” to set the timer countdown.
Hours - Tenths - Minutes
To confirm the set time, do not touch anything for 10 seconds.
When the countdown has finished, the digits are reset and an audible signal is emitted. The function can
be interrupted by pressing any key.
Repeat the steps described to change the countdown value.
To disable: switch on the hob making sure there are no pans or active cooking areas.
Press the digit to access the timer menu and use “+” and “-” to set the display to “0 0 0” “-” or press the
On/Off key.
Melting
To enable: select one of the 4 cooking zones and press .
The digit of the selected zone shows .
To disable: press or press .
Heating function
This function is used to heat a pan to the maximum power before continuing to cook at a selected level.
The time interval for which the cooking zone is held at maximum power depends on the final cooking
level that has been set. See the table:
Power level Timer (seconds)
1 48
2 144
3 230
4 312
5 408
6 120
7 168
8 216
9 Not available
P Not available
To enable, with a pan on the hob and the cooking zone selected, press and hold the selected value
(from 1 to 8) on the power bar for 3 seconds. The display of the corresponding cooking zone indicates
“A”.
The cooking level can be increased, but the function is disabled if it is decreased.
It can also be disabled by touching and holding down the key of the cooking zone in question for 3
seconds.
Pause function
This function allows you to pause/restart any active function on the hob, by reducing the power available
in the cooking zone and resetting all the functions. If the Pause function is not disabled with 10 minutes,
the hob automatically switches off.
To enable: With a pan on the hob and the cooking zone selected, press and hold the Pause function key
for at least 1 second. All the displays show .
To disable: press and hold for 1 second until it starts flashing. Press any other key within 10
seconds. The function is disabled and the hob continues with the previous settings.
Recall function
This function is used to recall the function settings of the hob if it is switched off by mistake or the electri-
city is unexpectedly cut off.
When the hob is switched off, if it is switched on again with 6 seconds by touching , the key
flashes for 6 seconds. Press the key to recall the functions set previously. A beep is emitted to con-
firm the operation.
Combo mode
(“bridge” func-
tion)
This function allows 2 cooking areas to be combined to use and control them as if they were one and
have a bigger cooking area at your disposal. This function allows you to use pans with a wider base.
Only the cooking areas on the left and on the right can be selected for use with this function.
To enable/disable: press the digits of the left-hand cooking areas at the same time to select the 2 areas
be combined until the digit appears to show that the function has been enabled. The other digit is
used to set the power level.
26
Bekijk gratis de handleiding van Franke FSM 7081R HI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Franke |
| Model | FSM 7081R HI |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 24248 MB |
