Fluke TiS20+ MAX handleiding
Handleiding
Je bekijkt pagina 16 van 38
TiS20+/TiS20+ MAX
Users Manual
12
To use the temperature range high and low values on the display for future measurements:
1. Set Level/Span to Manual.
2. Push a to rescale the display and save the temperature values on the display at that
time.
To use a different temperature range, use the arrow keys to change the Level/Span, or
push a twice to rescale.
Note
The Imager always powers up in the same Level/Span mode, Auto or Manual, as when
the Imager was powered down.
Emissivity Adjustment
All objects radiate infrared energy. The actual surface temperature and emissivity of the target
affects the quantity of energy radiated. The Imager senses the infrared energy from the
surface of the target and uses the data to calculate an estimated temperature value. Many
common materials such as wood, water, skin, cloth, and painted surfaces, including metal,
radiate energy well and have a high emissivity factor of ≥90 % (or 0.90). The Imager measures
temperatures accurately on targets with a high emissivity.
Shiny surfaces or unpainted metals do not radiate energy well and have a low emissivity factor
of <0.60. For the Imager to calculate a more accurate estimate of the actual temperature of
targets with a low emissivity, adjust the emissivity setting.
Warning
To prevent personal injury, see emissivity information for actual temperatures.
Reflective objects result in lower than actual temperature measurements. These
objects pose a burn hazard.
Set emissivity as a direct value or from a list of emissivity values for some common materials.
If the emissivity value is <0.60, a caution shows on the display.
Note
Surfaces with an emissivity of
<
0.60 make it difficult to determine reliable and
consistent actual temperatures. The lower the emissivity is the greater the potential of
error is when the Imager calculates the temperature measurement because more of
the energy reaching the camera is specified as background temperature. This is also
true even when adjustments to the emissivity and reflected background adjustments
are performed properly.
Bekijk gratis de handleiding van Fluke TiS20+ MAX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Fluke |
| Model | TiS20+ MAX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3640 MB |
