Flir Quasar handleiding
Handleiding
Je bekijkt pagina 21 van 85
This document does not contain any export-controlled information.
Installation
14
Quasar Hemispheric Mini-Dome with Edge AI Video Analytics Camera Installation and User Guide - Revision 100 - April 2025
Task
DNA tool
Camera's web page
Discover camera IP address
•
Configure IP address, mask, and gateway
•
•
Change user credentials
•
•
Configure DNS settings, MTU, and Ethernet speed
•
Change video format
•
•
Configure more than one camera at the same time
•
Note
·
Teledyne FLIR recommends using the DNA tool to discover the camera on the network. It does not
require a license to use and is a free download from Teledyne FLIR. While the software is open, click
the Help icon .
·
Client side dewarping will not be supported until UVMS version 9.3.1.
·
For more information about using a supported VMS to configure one or more cameras at the same
time, see the VMS documentation.
By default, DHCP is enabled on the camera and a DHCP server on the network assigns the camera an IP
address. If the camera cannot connect to a DHCP server, the camera’s default IP address is
192.168.0.250.
·
If the camera is managed by FLIR Horizon or Meridian VMS and the VMS is configured as a DHCP
server, the VMS automatically assigns the camera an IP address.
·
If the camera is managed by FLIR Latitude VMS or is on a network with static IP addressing, you can
manually specify the camera’s IP address using the DNA tool or the camera's web page.
To manually specify the camera's IP address using the DNA tool:
1. Make sure the camera and the PC are on the same LAN segment.
2. Run the DNA tool (DNA.exe) by double-clicking . The Discover List appears, showing compatible
devices on the VLAN and their current IP addresses.
In the DNA Discover List, verify that the camera's status is Online.
If this is the first time you are configuring the camera or if it is the first time after resetting the camera
to its factory defaults, DNA automatically logs in to the camera with user name admin and its default
password (admin).
If the admin user's password is not the default password, you need to authenticate the camera.
a. In the DNA Discover List, select the camera and then click Login.
Bekijk gratis de handleiding van Flir Quasar, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Flir |
| Model | Quasar |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 15398 MB |
Caratteristiche Prodotto
| Kleur van het product | Black, White |
| Gewicht | 2900 g |
| Hoogte | 279 mm |
| Soort | IP-beveiligingscamera |
| Internationale veiligheidscode (IP) | IP66 |
