Flir Meridian 9.3 handleiding
Handleiding
Je bekijkt pagina 50 van 51
July 2024
46
Alarm Display Mode
Latitude, Horizon, Meridian Control Center User Guide
Block Mode: All scenes associated with an alarm type display, in sequence, in one tile. You can
view information about multiple alarms at the same time, if you have more than
one tile ‘armed for alarms’.
Salvo Mode: Only one alarm displays at any one time. As many scenes as possible of that alarm
are displayed on the available ‘armed for alarms’ tiles and they remain there for the
‘dwell time’ of that alarm. Provided all scenes for the alarm have been displayed,
the next alarm in the queue according to priority is displayed. If you do not have
enough ‘armed for alarms’ tiles for the scenes of one alarm to be shown, then
when the alarm dwell time passes, the remaining scenes of that alarm are
displayed before the next alarms appear.
Note: If your user settings have been set for you to work in Salvo Mode, it is important that you
keep sufficient tiles ‘armed for alarms’ so that you can view all the cameras associated with
an alarm.
Bekijk gratis de handleiding van Flir Meridian 9.3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Flir |
| Model | Meridian 9.3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14334 MB |
