Flir Meridian 9.2 handleiding
Handleiding
Je bekijkt pagina 69 van 97
65November 2022
Cameras Screens
Horizon/Meridian Admin Center Help File
CF-6308-00-0, CM-6308-P1-I, CM-3304-XX, CM-3308-XX, CB-3304-XX, CB-3308-XX
Selecting "Motion Recording" from the Wizard:
Setting a motion zone on a camera with enabled analytics rules (set via the camera web
page) will disable the analytics rule. Therefore, if a new system is being configured with
cameras that have Basic Analytics rules configured and enabled, and the Administrator
selects "motion recording" from the wizard, the system will set those cameras to recording
"Off" by default so to not disable their analytics configuration with a motion zone.
The user can then choose to change those settings from Admin Center after the Wizard is
complete.
These cameras will NOT have the usual default motion zone configured on all other
cameras. If the user choose to change recording mode to "motion" they will be prompted
with the following message:
Analytics Tab:
Analytics are configured via the cameras webpage, however, there is a basic user interface
for enabling/disabling and arming/disarming a camera that supports basic analytics.
Bekijk gratis de handleiding van Flir Meridian 9.2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Flir |
| Model | Meridian 9.2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12565 MB |
