Flir Meridian 9.2 handleiding
Handleiding
Je bekijkt pagina 61 van 97
57November 2022
Cameras Screens
Horizon/Meridian Admin Center Help File
6.4.1.4
PTZ Settings
The PTZ Tab provides control over all the Pan Tilt Zoom functions of applicable cameras.
PTZ Settings
On Discovery, if the camera is recognized by the system as a supported PTZ camera, then
the following fields are all set to the Camera's correct default settings.
In the PTZ configuration page of a unit with a motorized lens, a dedicated motorized lens
driver should appear under "PTZ Protocol" and the following buttons will be enabled: zoom
in/out, focus, iris, auxiliary, lock and menu.
The following fields are shown:
PTZ Settings Check-box
PTZ Protocol
Serial Port Settings
Communication
Serial Address
Parity
Data Bits
Stop bits
Bitrate
Caution: The user should only use these fields when the camera's PTZ functions are controlled through a
Serial Port interface (as with an analog PTZ interfaced through an encoder).
Bekijk gratis de handleiding van Flir Meridian 9.2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Flir |
| Model | Meridian 9.2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12565 MB |
