Flex RD SP 12/18/230 handleiding
Handleiding
Je bekijkt pagina 18 van 172
18
RD SP 12/18/230
overwritten by performing the same steps.
NOTE
In DAB mode, when there is no signal, the
radio will turn off after 1 hour.
Tuning FM (see figure L)
Press the mode button (9) until FM is shown
on the display.
■
Manual tuning: Briefly press the
or
button to reach the desired frequency.
Each press will increase or decrease the
frequency by 0.05 MHz for FM range. The
frequency is shown on the display.
■
Automatic/Scan Tuning: press the
or
button and hold for 2 seconds, the
tuner will automatically seek the first radio
station with strong signal and stop at that
station’s frequency.
■
The way to store stations is the same as
DAB.
Bluetooth ® operating mode (see
figure M)
Press the mode button (9) several times
until the BT (Bluetooth®) mode is active or
briefly press the Bluetooth-pairing button
(13) to go straight into Bluetooth® mode. The
Bluetooth® icon flashes when BT mode is
active but no Bluetooth® device is connected/
paired.
To pair a Bluetooth® device:
■
Activate the Bluetooth® function on the
device to be connected (smartphone
or similar device) and the Bluetooth®
icon stays on after a device is connected
successfully.
■
Single press the
or button to change
to previous or next song. Press the play/
pause button (17) to pause or play.
To disconnect the Bluetooth® device
■
Press the Bluetooth-pairing button (13)
and hold for 3 seconds. The paired device
is disconnected.
The Bluetooth® name of the device is
FLEX stack pack radio. When in Bluetooth®
operating mode, the radio will turn off
automatically 1 hour after being disconnected
from a paired device or never being paired
with a Bluetooth® device.
AUX operating mode (see figure
N)
■
Select the AUX operating mode using the
mode button (9).
■
Open the battery compartment cover (22).
■
Connect the AUX cable (24) with the radio
and the external music source (MP3 player
or similar).
■
Switch on the external music source.
■
When finished playback, disconnect the
AUX cable (24) and properly close the
battery compartment cover (22).
NOTE
Batteries of the connected devices cannot
be charged via the AUX connection.
When the radio is switched off, the
connected devices are not switched off.
USB ports
When a battery is installed or the radio is
connected to the AC power supply and the
radio is turned on, the USB power ports (20
&21) will supply charging power for low
power devices such as cell phones, MP3
players, etc. Immediately disconnect the USB
device after charging.
When finished, disconnect the USB cables
and properly close the battery compartment
cover (22).
Bottle opener (see figure O)
This STACK PACK™ radio features a bottle
opener (5) for quick removal of metal bottle
caps from glass bottles.
Maintenance and care
WARNING!
Remove the battery before carrying out any
work on the radio.
Cleaning
■
Clean the device with a dry cloth or brush.
Repairs
■
Repairs must be carried out by an
authorized customer service centre only.
Spare parts and accessories
For other accessories, in particular tools
and polishing aids, see the manufacturer’s
catalogues.
Exploded drawings and spare-part lists can
Bekijk gratis de handleiding van Flex RD SP 12/18/230, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Flex |
| Model | RD SP 12/18/230 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 24058 MB |
