Festool Cleantec CTL 36 AC PLANEX handleiding

Stofzuiger

Festool

117 pagina's

PDF beschikbaar

Handleiding

5 Intended use

Mobile dust extractor suitable for

– extracting dust up to 1 mg/m³ according to

dust class L,

– extracting water,

– for increased loads during commercial use,

according to IEC/EN 60335-2-69.

The user is liable for improper or non-in

tended use.

6 Commissioning

 

WARNING

Unauthorised voltage or frequency!

Risk of accidents

► Observe the specifications on the ma

chine's name plate.

► Observe country-specific regulations.

6.1 Initial commissioning

► Insert the filter/disposal bag[2].

► Fit the cord holder[3].

► Connect the suction hose[4].

6.2 Connecting a mobile dust extractor



WARNING

Risk of injury from power tools starting up

unexpectedly

► Before switching on, ensure that the con

nected power tool is switched off.

 

WARNING

Risk of injury from electric current

► Insert the mains plug into an earthed

mains socket.

► Do not reach into the electrical outlet mod

ule on the mobile dust extractor.

While the mobile dust extractor is connec

ted to the mains socket, an electric cur

rent is running through electrical outlet

module on the mobile dust extractor at all

times.

Connecting the mobile dust extractor to a

mains socket

The mobile dust extractor is switched off.

► Connect the power cable to a mains socket.

☑ The electrical outlet module[1-2] is live.

Switching the mobile dust extractor to standby

mode

► Press the on/off switch[1-13].

☑ The electrical outlet module[1-2] is live.

The green LED[1-10] indicates standby

mode.

Starting the mobile dust extractor automati

cally

The mobile dust extractor is in standby mode.

► To start the mobile dust extractor automati

cally: Switch on the connected power tool.

Starting the mobile dust extractor manually

The mobile dust extractor is in standby mode.

► Press the MAN button[1-12].

Pull the mains plug from the mains

socket when you are not using the mo

bile dust extractor and before perform

ing any cleaning and maintenance work.

7 Connecting a device



WARNING

Risk of injury from the mobile dust extractor

starting up unexpectedly

► Before performing any work with the mo

bile dust extractor, check which remote

control and which power tool are connec

ted to the mobile dust extractor.

► The remote control must only be attached

to the suction hose.

► A battery-powered power tool must always

be connected to the mobile dust extractor

via the suction hose. After finishing work,

the connection to the mobile dust extractor

must be disconnected.

7.1 Connecting a power tool

 

WARNING

Risk of injury

► Observe the maximum electrical outlet

module connected load (see "Technical da

ta" section).

► Switch off the power tool.

Connecting a mains-powered power tool to the

mobile dust extractor

► Connect the power tool to the electrical out

let module[1-2].

☑ The power tool is connected to the mobile

dust extractor via the power cable.

Connecting a battery-powered power tool to

the mobile dust extractor

► In standby mode, press the connection but

ton[1-7].

English

Bekijk gratis de handleiding van Festool Cleantec CTL 36 AC PLANEX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.