Festool Cleantec CT 15 E HEPA handleiding

Stofzuiger

Festool

153 pagina's

PDF beschikbaar

Handleiding

7.3 Temperature cut-out

A temperature cut-out switches the mobile

dust extractor off when it reaches a crit

ical temperature to prevent overheating. The

bottom LED[1-12] indicates a fault.

LED lights up red Excessive temperature

► Switch off the mobile dust extractor, let it

cool down.

► Switch on the mobile dust extractor again

after approx. five minutes.

8 Working

8.1 Dust extraction

Extracting dry materials

Always use a filter bag.

8.2 Extracting wet materials/liquids

Remove the filter bag!

Use a special wet filter.

The dust extraction stops automatically when

the maximum fill level is reached.

The bottom LED [1-12] lights up red.

► Switch off the mobile dust extractor [1-10].

► Open the locking clips [1-7] and remove the

top section of the machine.

► Empty the dirt trap [1-9].

After wet extraction, allow the wet filter to dry!

Dry the mobile dust extractor and dirt trap

before extracting dry dust and before storing

them.



CAUTION

Hazardous dust

Damage to the respiratory passage

► After extracting wet materials, remove the

wet filter and replace it with the main filter

for dry materials.



CAUTION

Escaping foam and liquids

► Switch off and empty the machine immedi

ately.

8.3 Exhaust-air outlet

 

CAUTION

Hazardous dust

Damage to the respiratory passage

► Do not blow off any dust!

The exhaust-air outlet offers the option of

diverting the exhaust air outside a building

using the suction hose.

► Open the grille in front of the exhaust

opening[1-8].

► Insert the suction hose in the exhaust

opening[1-8].

8.4 Changing the filter bag with minimal

dust

► Open the locking clips and remove the top

section of the machine

[2].

► Pull the tab on the filter bag until the filter

bag opening is fully closed.

The filter bag is now securely closed and can be

removed.

► Fit the top section of the machine and close

the locking clips.

8.5 Changing the filter element [6]

► Pull out the used filter drawer[1-6].

► Dispose of the used filter drawer in accord

ance with statutory regulations.

► Insert the new filter drawer[1-6].

Order numbers for accessories, filters and

consumables in the Festool catalogue or

online at "www.festool.com".

– Only use original Festool accessories and

consumables. Only accessories tested and

approved by Festool are safe and perfectly

adapted to the machine and application.

NOTICE

Damage to the motor

► Never extract material without a main filter

or with a damaged main filter, as this can

damage the motor.

8.6 After finishing work

► Switch off the mobile dust extractor and

pull out the mains plug.

► Empty the dirt trap.

► Vacuum and wipe the inside and outside of

the mobile dust extractor to clean it.

► Wind up the mains power cable.

► Place the mains power cable[4-1] in the

sealable holder. To do so, lay the power

cable through the recess [4-2].

► Disconnect the suction hose[5-1] and

secure it to the mobile dust extractor with

the suction hose mount[1-3].

English

Bekijk gratis de handleiding van Festool Cleantec CT 15 E HEPA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.