Festool Cleantec CT 15 E HEPA handleiding

Stofzuiger

Festool

153 pagina's

PDF beschikbaar

Handleiding

5 Intended use

Mobile dust extractor suitable for

– Extracting non-hazardous dust, dirt, sand

and chips,

– extracting water,

– for increased loads during commercial use,

according to IEC/EN 60335-2-69.

The mobile dust extractor is only suitable for

indoor use.

The user is liable for improper or non-intended

use.

6 Commissioning

 

WARNING

Unauthorised voltage or frequency!

Risk of accidents

► Observe the specifications on the

machine's name plate.

► Observe country-specific regulations.

6.1 Initial commissioning

► Insert the filter bag[2].

► Connect the suction hose[3].

6.2 Connecting the mobile dust extractor



WARNING

Risk of injury from uncontrolled tool start-

► Before switching on ensure that the

connected tool is switched off.

 

WARNING

Risk of injury from electric current

► Insert the mains plug into an earthed

socket.

► Do not reach into the electrical outlet

module on the mobile dust extractor.

While the mobile dust extractor is

connected to the mains socket, an electric

current is running through electrical outlet

module on the mobile dust extractor at all

times.

Connecting the mobile dust extractor to a

mains socket

The mobile dust extractor is switched off.

► Connect the power cable to a mains socket.

The electrical outlet module[1-1] is live.

Switching the mobile dust extractor to standby

mode

► Press the on/off switch[1-10].

The electrical outlet module[1-1] is live.

The green LED[1-12] indicates standby

mode.

Starting the mobile dust extractor automati

cally

The mobile dust extractor is in standby mode.

► To start the mobile dust extractor automati

cally: Switch on the connected tool.

Starting the mobile dust extractor manually

The mobile dust extractor is in standby mode.

► Press the MAN button [1-11].

Pull the mains plug from the socket

when you are not using the mobile dust

extractor and before performing any

cleaning and maintenance work.

6.3 Connecting power tools

 

WARNING

Risk of injury

► Observe the maximum electrical outlet

module connected load (see section "Tech

nical data").

► Switch off the power tool.

Connecting a mains-powered power tool to the

mobile dust extractor

► Connect the power tool to the electrical

outlet module [1-1].

☑ The power tool is connected to the mobile

dust extractor via the power cable.

7 Settings

7.1 Adjusting the suction power

► Press the plus or minus button [1-12] while

extracting.

7.2 Connecting sleeve

The bypass function of the connecting

sleeve prevents strong suction from sanding

machines and floor nozzles on smooth

surfaces.

Open

► Turn the adjusting ring to the "OPEN" posi

tion.

► Turn the adjusting ring to the "CLOSE" posi

tion.

English

Bekijk gratis de handleiding van Festool Cleantec CT 15 E HEPA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.