Festo EPCE-TB-45 handleiding
Handleiding
Je bekijkt pagina 7 van 36
Festo — EPCE-TB — 2023-11d
Assembly
7
6 Transport
NOTICE
Unexpected and unbraked movement of components
• Secure moving components for transport.
Transport conditions and storage conditions
–
Store and transport the product in its original packaging.
–
Store the product in a cool, dry environment protected from UV and corrosion. Keep storage times
short.
– Store product in areas where it is not exposed to oils, greases and degreasing vapours.
7
Assembly
7.1
Safety
WARNING
Risk of Injury due to Unexpected Movement of Components
For vertical or slanted mounting position: when power is off, moving parts can travel or fall uncon-
trolled into the lower end position.
• Bring moving parts of the product into a safe end position or secure them against falling.
WARNING
Risk of injury due to unexpected movement of components.
The drive can move freely in the voltage-free state. This can cause unexpected movements of the
connected mechanics and crush parts of the body.
• Bring moving parts of the mechanical system into a safe position.
7.2
Unpacking
1.
Open packaging.
2.
Remove all transport materials (e.g.foils, caps, cardboard boxes).
3. Remove the product from the packaging and place it on the mounting surface.
4. Dispose of packaging and transport materials.
7.3 Mounting the cylinder
Requirement
– No collision in the range of motion of the attachment component with mounting components.
– Flat mounting surface maximum 0.2mm over the stroke length of the bearing surface.
–
No distortion or bending when installing the product.
1. Select mounting attachments
è
www.festo.com/catalogue.
2.
Place the mounting attachments on the support points.
3.
Tighten retaining screws.
Observe the maximum tightening torque and maximum screw-in depth.
For additional information, contact your local Festo Service.
Bekijk gratis de handleiding van Festo EPCE-TB-45, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Festo |
| Model | EPCE-TB-45 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3174 MB |
