Festo ELGS-BS-KF-32-500-8P-ST-M-H1-PLK-AA handleiding

Niet gecategoriseerd

Festo

28 pagina's

PDF beschikbaar

Handleiding

Festo — ELGS-BS — 2023-11e

Technical data

11.1 Repair

The product can be repaired or maintained.

–

Spare parts and accessories

www.festo.com/spareparts.

–

Replace with an identical product

www.festo.com/catalogue.

12 Replacement

Replacing drive system

Save the application parameters to the IO-Link master è Manual integrated drive EMCS.

Demount the defective drive system

13 Removal.

3. Mount the new drive system

7 Mounting.

Connect the drive system

8 Installation.

Commission the drive system

9 Commissioning.

Update the firmware è Manual integrated drive EMCS.

Check the current status of the application data è Manual integrated drive EMCS.

Replace drive or integrated drive EMCS è Manual integrated drive EMCS.

13 Removal

WARNING

Unexpected movement of components.

Injury due to impacts or crushing.

• Before working on the product, switch off the control and secure it to prevent it from being switched

back on accidentally.

WARNING

Risk of Injury due to Unexpected Movement of Components

For vertical or slanted mounting position: when power is off, moving parts can travel or fall uncon-

trolled into the lower end position.

• Bring moving parts of the product into a safe end position or secure them against falling.

Demounting drive system

Allow the product to cool down to room temperature.

2. Disconnect electrical installations.

3. Remove the mounted attachment component.

4. Remove the attached accessories.

Remove the mounting attachments.

Observe transport information

6 Transport.

Demount drive or integrated drive EMCS è Manual integrated drive EMCS.

Technical data

Bekijk gratis de handleiding van Festo ELGS-BS-KF-32-500-8P-ST-M-H1-PLK-AA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.