Handleiding
Je bekijkt pagina 16 van 68
WARNING!
Impairment of the function of emergency stop devices.
Impairment of the function of emergency stop devices can result in serious injuries or death of per-
sons involved.
• Red-yellow marked emergency stop devices must be effective at all times and in all operating
modes of a machine or system.
• Handheld terminals that are not connected to the machine and have a red-yellow emergency stop
device, must be kept out of sight so they cannot be confused with functioning devices in an emer-
gency.
• When unlocking the emergency stop device, do not cause an uncontrolled restart.
• Do not use the emergency stop device as a substitute for other safety devices.
• Do not use the emergency stop device on the handheld terminal as a replacement for the emer-
gency stop switches to be attached directly to the machine.
• After violent impact with the handheld terminal (e.g.if it is dropped), check the function of the
emergency stop device.
• Check the correct mode of operation of the emergency stop device every 6 months by actuating it.
• For additional information on the emergency stop device and the emergency stop function,
observe the corresponding directives and standards.
5.1.3.3 3-position enabling switch
The handheld terminal CDSA-D3-RV has a 3-position enabling switch. An essential feature is the 2-cir-
cuit design and the forced opening in accordance with EN 60947-1 and EN 60947-5-8 to the third
switch position.
WARNING!
Danger to persons not recognised in time if the 3-position enabling switch is used as a safety func-
tion.
The 3-position enabling switch is only suitable for use in a safety function if the person actuating the
3-position enabling switch detects a hazard to people in good time and can immediately take meas-
ures to avoid hazards. A hazard to persons that is not recognised in good time can result in injuries or
death to the persons involved.
• As an additional measure, reduce the speed of the movement. Determine the permissible speed
based on a risk assessment.
• Do not initiate commands for hazardous statuses with a 3-position enabling switch alone. A
second, deliberate start command is required for this, suchas a key on the handheld terminal.
• Only the person who actuates the 3-position enabling switch may be in the danger zone.
• Check the correct mode of operation of the safety function every 6 months by actuating all posi-
tions of the 3-position enabling switch.
• For additional information on the 3-position enabling switch, observe the corresponding directives
and standards.
Product overview
16 Festo — CDSA-D3-RV — 2020-08
Bekijk gratis de handleiding van Festo CDSA-D3-RV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Festo |
| Model | CDSA-D3-RV |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 5205 MB |