Ferrofish Pulse 16 MX handleiding
Handleiding
Je bekijkt pagina 8 van 28
8
Main Menu – CLOCK - SMUX modes
Although the PULSE16 always works using the 16 analog input and output
channels, the number of ADAT channels is dependent on the sample
frequency and the SMUX mode:
SMUX/1
The SMUX/1 mode allows sampling rates from 32kHz up to 48kHz.
SMUX/2
When using higher sampling rates in SMUX/2 mode (64kHz to 96kHz), the
digital channels are being split into channel pairs (Signal MUltipleXing). For
this reason, the number of channels is reduced by half. To overcome this
limitation the digital ADAT I/O’s of the PULSE16 are available as a double
configuration. So, you can run all 16 analog inputs and outputs at sample
rated up to 96kHz in SMUX/2 mode.
SMUX/4 (MX or MADI option only)
At even higher sampling rates from 128kHz up to 192kHz the SMUX/4
mode is used. In this mode, an analog channel is being split up to four
digital channels.
Using the optional MADI interface all 64 x 64 digital channels are used for
16 analog inputs and 16 analog outputs. In other words: A single PULSE16
unit can handle all full 16 inputs and outputs at 192kHz without any
limitation of the total channelcount.
Bekijk gratis de handleiding van Ferrofish Pulse 16 MX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ferrofish |
| Model | Pulse 16 MX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4365 MB |
