Ferrofish Pulse 16 MX handleiding
Handleiding
Je bekijkt pagina 6 van 28
6
Main Menu
By pressing the MENU button you engage the main menu. Use the SELECT
pot to navigate to the desired menu point and press MENU to select it.
Inside the Main Menu you can choose between:
CLOCK
Here you select if the PULSE16 should generate the wordclock signal by
itself (Master/Leader) or if it should listen to an wordclock signal
(Slave/Follower) from an external source. If choosing Master you can also
set the sample rate here.
GAINS
Here you can set the sensitivity of the 16 analog inputs individually.
LEVELS
Here you can set the level of the 16 analog outputs individually.
ROUTING
In this menu you can determine the routing of the inputs and outputs.
MADI SFP (MX or MADI option only)
Here you can unlock the PULSE16 with an optional unlock code and an
optional SFP hardware module to turn it into a PULSE16 MX with full MADI
support. The Pulse16 MX shows parameters of the SFP module.
SETUP
The setup menu lets you control various settings
PRESET
You can load or save presets to one of a total six preset slots.
Bekijk gratis de handleiding van Ferrofish Pulse 16 MX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ferrofish |
| Model | Pulse 16 MX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4365 MB |
