Ferrofish A32pro handleiding
Handleiding
Je bekijkt pagina 15 van 24
15
A32pro Series Manual: Main Menu > Setup > Settings
Main Menu > Setup > Settings
SETTINGS
In the Settings Menu you have access to the following functions:
∙ A/D: Selection of the filters of the analog/digital converters.
∙ D/A: Selection of the filters and the operating mode for the digital/analog converters.
∙ ALERT: Management of alerts for Lock, MADI, temperature and power supply.
∙ VISUAL: Here you can adjust the parameters of the displays and the optical displays.
∙ BNC: Here the termination of the wordclock input can be switched on or off.
∙ DEVELOP: Developers can start and test their own software developments in this menu.
∙ CONFIG: Here you can reset the unit or start Vegas Mode.
In general, the group delay is lower with minimum-phase filters than with linear-phase filters.
However, due to their design, linear-phase filters may cause "ringing" (especially with percussive signals).
At 44.1 kHz, the group delay of the filters is all less than 1 ms; minimum- phase filters have the lower group delay.
ADC SETTINGS
In the ADC Settings menu, one of the eight different anti-aliasing filters for the A/D converters can be
selected. The user can choose between minimum and linear phase filter designs:
∙ Minimum Phase: Standard / Fast Roll-Off / Slow Roll-Off / Slow Roll-Off Low Dispersion
∙ Linear Phase: Apodizing / Fast Roll-Off / Fast Roll-Off Low Ripple / Slow Roll-Off
!
Please note that the chosen filter applies to all A/D channels.
DAC SETTINGS
In the DAC Settings menu, you can choose between two different filters for the DA converters.
A minimum-phase filter and a linear-phase filter are available:
∙ Minimum Phase: Standard
∙ Linear Phase: Fast Roll-Off Low Ripple
The group delay of all filters is less than 1ms at 44.1kHz.
Please note that the chosen filter applies to all D/A channels.
ALERT
The following parameters can be monitored in the Alert Menu:
∙ MADI Alert ON/OFF: When using two SFP MADI modules,
they can be monitored for signal failure.
∙ Power Alert: When using two power supplies, they can be
monitored for signal failure.
∙ Temperature Alert: An alert is issued when a temperature
limit is reached or exceeded.
In addition, the D/A converter has three operation modes:
The MODE setting allows additional configuration of the D/A converter. MODE 1, 2 or 3 switches between different operating modes that offer
different listening experiences.
Bekijk gratis de handleiding van Ferrofish A32pro, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ferrofish |
| Model | A32pro |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7127 MB |
