Handleiding
Je bekijkt pagina 19 van 34
- 19
-
Placing Product into Upper Food Pan Section of Case
1/3 PAN
1/4 PAN
1/6 PAN
1/2 PAN
1/3 PAN
MAIN ADAPTER BAR 12.75"
FEDERAL #M19003-1
1/4 PAN ADAPTER BAR 10.5"
FEDERAL #M19003-2
1/6 PAN ADAPTER BAR 7"
FEDERAL #M19003-3
- Determine Food pan arrangement and size requirements.
- Install food pans and place adapter bars provided between all pans. (There cannot be air gaps
between pans). See drawing above for typical arrangement.
- Above drawing shows a typical food pan arrangement. Any arrangement of Full, 1/2, 1/4, 1/3 or 1/6
size pans can be used provided sufficient adapters are used.
SSRSM5052 = (4) HALF PANS, SSRSM5952 = (5) HALF PANS, SSRSM7752 = (7) HALF PANS,
- A set of divider bars are supplied with each case. If additional adapters are required call to order
required adapters.
- Do not run case without all food pans and all adapters installed.
NOTICE:
CASE MUST BE STOCKED WITH PRE-CHILLED PRODUCT ONLY.
NOTICE:
This refrigerated display case is designed to operate
in a maximum environment of 75 DEG. F and 55% relative
humidity. Exceeding these limits will cause poor case
performance and sweating of glass panels.
NOTICE:
DO NOT RUN CASE WITHOUT ALL FOOD PANS INSTALLED.
LOWER SECTION OF CASE AND OTHER FOOD PANS WILL NOT HOLD PROPER
TEMPERATURE IF ALL PANS ARE NOT INSTALLED.
Bekijk gratis de handleiding van Federal SSRPF5952, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Federal |
| Model | SSRPF5952 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 4805 MB |
