FBT DM-8208 handleiding
Handleiding
Je bekijkt pagina 19 van 32
19
DM-8208 SOFTWARE
DELAY
• Delays can be adjusted in increments of 1 ms up to a maximum of
300 ms.
• You can apply or not apply the applied Delay on On / Off in the
upper right corner. When it is On (On), the color of the graph will be
green. If it is not set (Off), the color of the graph will be gray.
COMP
• Threshold (Thres): The starting level at which the compressor is ap-
plied. You can adjust from 60dB to 0dB in 1dB increments.
• Ratio: The compression ratio can be adjusted after the compressor
is applied. Compression ratios up to 1:20 can be applied and can be
adjusted in increments of 0.1.
• Attack: Start time at which the compressor is applied in the ratio of
the threshold to the ratio. It can be applied up to 3000ms and can be
adjusted in 1ms increments.
• Release: It is the time to return to the original signal after applying
the attack. It can be adjusted from 20 ms to 3000 ms in 1 ms incre-
ments.
• Make up Gain: This function raises the level of the signal that is re-
duced by applying the compressor. You can adjust from 0dB to 18dB,
in 1dB increments.
• Knee: You can adjust the point where the threshold and ratio are ap-
plied to SOFT, MED, and HARD. You can apply or not apply the provi-
ded Comp on On / Off in the upper right corner.
You can apply or not apply the provided Comp on On / Off in the upper
right corner. When it is On (On), the color of the graph will be green. If it
is not set (Off), the color of the graph will be gray.
Bekijk gratis de handleiding van FBT DM-8208, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | FBT |
| Model | DM-8208 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3902 MB |