FAR KUB24RTW handleiding

49 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 37 van 49
GB-12
SETTING THE THERMOSTAT KNOB
e gures do not mean specic set temperature, but
temperature level.
“1” means the warmest setting
“6”means the coldest setting
e higher the gure is, the lower the actual
temperature inside refrigerator shall be.
“OFF means stop running.
Recommended gear: “4”
e refrigerator is controlled with a thermostat knob located inside the fridge, towards the
upper right-hand corner. Turn the knob from the STOP (OFF) position towards the
higher
numbers for colder temperatures. e knob can be adjusted from setting 1 to 6.
Higher settings on the knob (6) mean lower temperatures (colder) in all compartments of
the appliance.
Changes of the ambient temperature aect temperature in the interior of the appliance so
choose a correct setting of the temperature control knob, depending on your ambient
conditions.
In the STOP (OFF) position the appliance does not operate (the cooling system is
switched o), but power supply is not interrupted.
Please Note: If the appliance is switched o you must wait at least 5 minutes before
restarting the appliance or re-inserting the plug into the wall outlet.
is is to allow the protection device in the compressor to reset.
If the compressor fails to start correctly remove the plug and wait for 5 minutes before you
try again then the compressor should restart normally.
estorage temperature may be aected by:
e room temperature
– How often the door is opened
– How much food is stored
– Position of the appliance
When you set the correct temperature, all these factors mentioned above shall be taken
into account.

Bekijk gratis de handleiding van FAR KUB24RTW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkFAR
ModelKUB24RTW
CategorieKoelkast
TaalNederlands
Grootte3573 MB