Fakir Starky WDA 700 handleiding
Handleiding
Je bekijkt pagina 38 van 44
Cleaning and maintenance
38
The Pre-lter (A) is located in the lid of the dirt water
tank. Open the lid, g Grasp recessed area on each
side of the pre-lter and pull upward to remove, then
rinse with water.
Let it dry out before placing back into the lid of the dirt
water tank. In the case of heavy soiling replace the
lter.
If the lter (B) and the oater (C) have been blocked,
they have to be cleaned. Take o the lter from the
tank lid, pull out the oater, and rinse them with water.
Let it dry out completely before putting back into
place.
Filter & oater
A
B
C
Brush roll self-cleaning
For optimal performance, use the quick self-cleaning
fuction as often as needed.
Please empty the dirt water tank before and after
self-cleaning. Place unit on storage tray. The clean
water tank should be at least 1/3 full of water. Press
and hold the “ON” button for 3 seconds to start the
brush roll self-cleaning mode.The appliance will auto-
matically shut o after it is nished.
The entire self-cleaning process takes about 40 sec-
onds.
Bekijk gratis de handleiding van Fakir Starky WDA 700, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Fakir |
| Model | Starky WDA 700 |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 4017 MB |
