Fakir Prestige VL 30 G handleiding
Handleiding
Je bekijkt pagina 25 van 32
9
2
5
6
1
4
8
7
3
9
Assembly
en
WARNING!
WARNING!
Assembly
Never use a defective appliance.
Prior to assembly, make sure that the mains
plug is unplugged. If the mains plug is plugged
in, the appliance could accidentally be switched
on, resulting in injuries.
• Place the nozzle plate (base foot) [2]
onto the cap nut [3] and fasten with the
enclosed cap nut [1].
• Place the back protective grid [5]
exactly onto the motor head [4] (insert
the three pins on the motor head into
the three holes in the protective grid)
and screw tightly using the included
cap nuts [6].
• If required, pull off the protective hose
from the motor axle.
• Place the fan blades [7] all the way
onto the motor axle and secure with
the included cap nut [8].
Attention: Left-handed thread.
• Place the front protective grid [9] exactly into the lower bracket on the rear pro tective
grid [5], push on and fix with the three swivel brackets (left, right and top). Fix both pro-
tective grids at the bottom with the included M3 screw and bolt.
Vertical adjustment
The cooling fan can be set to the desired vertical operating range by hand: from approx-
imately 15° to the front (downwards) up to approximately 25° to the back (upwards).
To do so, hold the cooling fan by the tube and – from the back only – carefully move the
motor head forwards or backwards until the desired position has been reached.
ATTENTION!
If the fan blade is blocked, switch off the cooling fan immediately and
disconnect it from the power supply. Eliminate the blockage before
operating the cooling fan again.
Bekijk gratis de handleiding van Fakir Prestige VL 30 G, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Fakir |
| Model | Prestige VL 30 G |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 2794 MB |
