Handleiding
Je bekijkt pagina 10 van 16
Operating instructions
The rotary knob and the marking on the casing show the setting of the thermostat.
To set the required room temperature: turn the knob to the right as far as it will go and wait
until the required temperature has been reached. Turn the knob then slowly back again until
the control lamp has been extinguished. The position of the knob now corresponds to the
required temperature. After reaching the room temperature of max. 15°C the heater switches
off automatically.
Taking care of your frost protector / Cleaning and maintenance
Before each cleaning, maintenance or repair disconnect the heater from the power supply.
Unplug the power cord from socket outlet or turn off the permanently installed disconnecting
switch (e.g. automatic cut-out, installation switch etc.) and let the heater cool down. Clean the
casing occasionally with a damp cloth and then wipe it dry. Do not use any strong abrasive
cleaning materials and do not let water get into the inside. Do not immerse the heater, power
cord or plug in water or other liquids. Danger of life!
Troubleshooting
Fault
Possible cause
Measures
•
Does not heat up
(control lamp does not
light up)
•
Fuse blown
•
Plug disconnected
•
Room temperature higher
than the setting
•
Overheating device has
reacted.
•
Check fuse box
•
Reconnect plug
•
If possible, set a higher
temperature
•
Do not cover frost protector
with any objects. Keep to
min. specified distances!
If the fault cannot be corrected by any of the above measures, contact your local specialist or
get in touch with our after-sales service. Repairs may only be made by authorised specialist or
our after-sales-service.
Guarantee
• If problems occur with the device never try to open or repair by yourself. Every intervention in the unit for
t
he change of original condition leads inevitably to the loss of the guarantee claim. Contact the retailer
where you have purchased the appliance. The guarantee for this device is based on the guarantee
instructions.
• Damages which occur to transport, overloading, natural erosion, non observance of the mounting-
/
oper
ating instructions or improper treatment will be excluded from the guarantee. The manufacturer is not
liable for any indirect consequential or financial damages.
• Technical changes concerning the advancement are reserve.
Disposal
The symbol on the product or on its packaging indicates that this product may not be treated as
household waste. Instead it shall be handed over to the applicable collection point for the recycling of
electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human health, which could
otherwise be caused by inappropriate waste handling of this product. For more detailed information
about recycling of this product, please contact your local authority, your household waste disposal
service or the shop where you purchased the product. This symbol is only valid in the European Union.
Bekijk gratis de handleiding van Fakir Prestige HF 500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Fakir |
| Model | Prestige HF 500 |
| Categorie | Heater |
| Taal | Nederlands |
| Grootte | 1779 MB |
Caratteristiche Prodotto
| Soort bediening | Draaiknop |
| Kleur van het product | Grey, Steel |
| Aantal vermogenniveau's | 1 |
| Breedte | 250 mm |
| Diepte | 100 mm |
