Handleiding
Je bekijkt pagina 51 van 76
OPERATION
Connect the power supply
When you connect the appliance to power (or
when power is restored after an outage), the
display will show 00:00 and you will need to
set the current time. You must set the current
time to use the appliance.
Note: In the event of a power outage, all
settings such as Duration, Temperature and
Heating Function will be lost. You will need to
re-enter the settings to continue cooking. If the
pyrolytic cleaning is interrupted (or the door
is locked for any other reason), the oven will
start the cooling and door opening procedure
before you can set the time. An interruption in
the power supply does not cancel the parental
lock, but its activation occurs only after setting
the current time and going to standby.
Set the current time
When you connect the appliance to power the
display will show ashing hour digits 00: (the
minutes digits do not ash). Use and to
set the hour. Touch to conrm the setting.
The minutes digits :00 are now ashing on the
display: (hour do not ash). Use and
to set the minutes. Touch to conrm the
setting. The appliance enters standby mode.
You will hear a beep when the current time is
stored in the appliance. To change the current
time in the Operation mode, touch and hold
. The symbol will be shown on the dis-
play. Touch the sensor once again and the
digits will start to ash. Now you can proceed
to set the current time.
The display brightness.
The LED display brightness varies depending
on the time of day. The display is dimmed dur-
ing 22:00 to 06:00 and its brightness is normal
during 06:00 to 22:00. Also, the display is
brighter when active than when the appliance
is in Standby mode.
Standby mode
Switch the appliance to standby mode to
reset all function settings, times, tempera-
ture and automatic programmes. All heating
elements are disconnected. The display is
dimmed except for the clock. In this mode,
only the on/o sensor is available on the
display. The sensor has reduced brightness.
The display is dimmed in this mode.
When Child Lock is on and you touch
, the LOC message and , symbols will
be displayed for 5 seconds instead of current
time/temperature.
To turn o the appliance and put it in standby.
• when you touch and hold for 3 sec-
onds at any time (you can turn OFF the
appliance even when Child Lock is on),
you will hear a beep;
• after a power outage and when you set
the current time;
• when you touch and hold for 3 sec
Function indicator symbols on the dis-
play
Meat probe connected*
OpenUp! (One-time mode)*
OpenUp! (Always mode)*
Minute Minder active
Duration
Programme end
Child Lock Active
Oven pre-heat active
* availability depending on the model
51
Bekijk gratis de handleiding van Fagor 9H-798TEN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Fagor |
| Model | 9H-798TEN |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 6222 MB |
