Handleiding
Je bekijkt pagina 46 van 56
46
OPERATION
Switchingotheappliance
● The hob operates when at least one cooking zone is on.
● To switch o the appliance touch the on/o sensor (1).
If the cooking zone is still hot, the relevant display (3) will show the letter „H” to indicate residual
heat.
Switchingocookingzones
● A given cooking zone must be active. Heat setting display is bright.
● To switch o a cooking zone touch the on/o sensor eld or touch the lower heat setting
sensor eld „-” (4) to reduce the heat setting to „0”.
Booster function „P”
The Booster Function increases the nominal power of the ø 210 mm cooking zone from 2300W
to 3000W, ø 160 mm cooking zone from 1200W to 1400W
In order to activate the Booster function, select the cooking zone, set the heat setting to „9” and
then touch the „+” (2) sensor eld again. The letter „P” will be shown on the display.
To deactivate the Booster function, touch the „-” (4) sensor eld to reduce the heat setting or
lift the cookware from the cooking zone.
For 160, 210 mm cooking zone, operation of the Booster function is limited to
10 minutes. Once the Booster function is automatically deactivated, the cooking
zone continues to operate at its nominal power.
The Booster function can be reactivated, provided the appliance electronic
circuits and induction coils are not overheated. When the pot is lifted from the
cooking zone when the Booster function is in operation, it remains active and
the countdown continues.
When the appliance electronic circuits or induction coils overheat when the Bo-
oster function is in operation, it is automatically deactivated. The cooking zone
continues to operate at its nominal power.
Bekijk gratis de handleiding van Fagor 3MI-21AC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Fagor |
| Model | 3MI-21AC |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 4043 MB |
