Extron NBP 200 handleiding
Handleiding
Je bekijkt pagina 20 van 73
Network Button Panels • Hardware Features and Installation — Wall-mountable Models 10
Overall Configuration Procedure
Step 5: Configure the IP settings of each
NBP and of the control processor.
See the network
communication
setup instructions
Create a new GC Professional or GC Plus project
and add the control processor to it.
Congure ports.
Add NBP button panels and congure the buttons.
Step 7: Test the system,
make adjustments, nalize conguration.
Save the project.
Step 4: Cable the NBPs and the control processor,
then apply power.
Cable all other devices.
Step 2: Prepare the installation site.
Step 1: Get ready.
Step 3: Change buttons or faceplates, if desired.
Step 8: Mount the NBPs.
Create monitors, schedules, timers, macros,
and local variables.
Build and upload the conguration to
the control processor.
If desired or required, install a new
security certicate (via Toolbelt).
Within Global Configurator
(GC Professional or
GC Plus mode):
Step 6
Figure 10. Overall Installation and Configuration Steps
10
network
communication
setup instructions
on page 24.
Bekijk gratis de handleiding van Extron NBP 200, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Extron |
| Model | NBP 200 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12926 MB |
