Extron NAV D 121 handleiding
Handleiding
Je bekijkt pagina 9 van 81
NAV SD 121 Scaling Decoder and NAV D 121 Decoder • Introduction 1
Introduction
This section contains the following topics:
• About this Guide
• About the NAV System
• Features
About this Guide
This guide contains installation, configuration, and operating information for the Extron NAV SD 121 Scaling
Decoder and NAV D 121 Decoder. The decoders receive HDMI video, audio, RS-232, IR, and digital I/O
communications via a managed IP network using multicast streaming technology.
NOTE: In this manual:
• The NAV SD 121 is referred to as a “scaling decoder” or “decoder”.
• The NV D 121 is referred to as a “decoder”.
• NAV decoders and encoders collectively are referred to as “endpoints.”
About the NAV System
The Extron NAV decoders and one or more compatible encoders form an AV distribution and switching matrix on
an Internet Group Management Protocol (IGMP) Managed IP Network (see figure 1). The encoders are
configured for low latency multicast streaming. The decoders are configured to join the assigned multicast group.
e
CONFIG
NAVigator
LAN
LNK
ACT
00 BNAV
NAVigator
OOB NAV/PoE
LAN
AV
Streaming
Network
Control
Network
Extron NAV E 121 #1
Extron NAV E 121 #2
Extron NAV E 121 #3
Extron NAV E 121 #n
Extron NAV SD 121 #1
Extron NAV SD 121 #2
Extron NAV SD 121 #
n
Extron NAV D 121 #1
TLP Pro 1025M
Blu-ray
?
NAV D 121
POWER
HDMI
RS-232 IR
DIGITAL I/O
RESET
12G
NAV 1G/PoE
+
Tx Rx SGG
OUTPUT
Extron NAV D 121 #n
NAV D 121
POWER
HDMI
RS-232 IR
DIGITAL I/O
RESET
12G
NAV 1G/PoE
+
Tx Rx SGG
OUTPUT
NAV SD 121
POWER
HDMI
RS-232 IR
DIGITAL I/O
RESET
12G
NAV 1G/PoE
+
Tx Rx SGG
OUTPUT
NAV SD 121
POWER
HDMI
RS-232 IR
DIGITAL I/O
RESET
12G
NAV 1G/PoE
+
Tx Rx SGG
OUTPUT
NAV SD 121
POWER
HDMI
RS-232 IR
DIGITAL I/O
RESET
12G
NAV 1G/PoE
+
Tx Rx SGG
OUTPUT
NAV E 121
G
RxTx
NAV 1G/PoE+
LOOP OUT
HDMI
RESET
POWER
INPUT
NAV E 121
G
RxTx
NAV 1G/PoE+
LOOP OUT
HDMI
RESET
POWER
INPUT
NAV E 121
G
RxTx
NAV 1G/PoE+
LOOP OUT
HDMI
RESET
POWER
INPUT
NAV E 121
G
RxTx
NAV 1G/PoE+
LOOP OUT
HDMI
RESET
POWER
INPUT
Figure 1. Typical NAV Application
About the Encoder
A NAV encoder encodes inputs from an HDMI video source, compresses them into a data stream, and streams
the coded signal across an IP network using the Extron PURE3 Codec. PURE3 exceeds many of the performance
characteristics of existing compression formats and provides exceptionally robust protection against network
errors, making it ideal for quality-critical applications.
Bekijk gratis de handleiding van Extron NAV D 121, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Extron |
| Model | NAV D 121 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12698 MB |
