Extron MLC Plus 84 handleiding
Handleiding
Je bekijkt pagina 30 van 58
MLC Plus 84 Series • Hardware Features and Installation 22
C
IR output port (see figure 18,
C
on page18) — An MLCPlus84 Series controller
can use infrared signals to control up to two devices via this port.
T
x
R
x
G
G
C
V
GS
CO
M
2
V
OL
IR
MLC Plus 84 D
Rear
Panel
To the
IR Receiver
of a
Projector,
Display,
or Source
Device
S
G
(-)
(+)
(-)
(+)
(+)
(-)
Ground
IR Output
or
3/16" (5 mm) max.
To Projector, Panel Display, or the Wired
IR Remote of a Source Device
IR Output Port
Output options:
• IR (30 kHz to 300 kHz,
with or without carrier signals)
Two Single IR Emitters
Ground
IR Output Signal
Unidirectional
IR
Figure 22. Wiring the IR Port
Connect the port directly to the wired IR port of another device. Or insert the wires from
up to two IR Emitters into this IR port and place the heads of the emitters over or next
to the IR signal pickup windows of the devices. For wiring, see the following diagrams
or the IREmitter Installation Guide (available on www.extron.com).
NOTE: Each emitter must be within 100 feet (30 m) of the controller for best
results.
Installing One Single Emitter Installing One Dual Emitter
Ground (−)
IR Signal (+)
One Single IR Emitter
Ground (−)
IR Signal (+)
Dual IR Emitter
Installing Two Single Emitters
When installing only single emitters, tie them in series as shown below.
(+)
(−)
(−)
(+)
IR Signal (+)
Ground (−)
Two Single IR Emitters
Bekijk gratis de handleiding van Extron MLC Plus 84, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Extron |
| Model | MLC Plus 84 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9928 MB |
