Extron IPL EXP S2 handleiding
Handleiding
Je bekijkt pagina 21 van 49
IPL EXP I/O Series • Hardware Features and Installation 13
Mounting to rack rails using a ZipClip
1. Fasten the ZipClip 200 mounting clip
to a rack rail using two rack screws as shown
in the diagram at right.
2. Insert the bottom of the EXP down into the clip,
starting with one end.
3. Pivot the other end toward the clip and press until
the clip snaps into place.
Furniture mounting
NOTE: The ZipClip is shipped with a set of four wood
screws.
1. Attach the ZipClip to the mounting surface
using two or more wood screws (see
1
at right). Make
sure the clip is oriented with the appropriate side facing
the mounting surface of the furniture and with the tab
accessible from the front of the furniture.
2. Insert the EXP into the ZipClip
2
as described
previously and press to snap it into place.
Inside
Rack
Side of Rack
ZipClip 200
Back of
Rack
IPL EXP 200
Under a Desk
2
1
Bekijk gratis de handleiding van Extron IPL EXP S2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Extron |
| Model | IPL EXP S2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7534 MB |
