Extron HC 402 handleiding
Handleiding
Je bekijkt pagina 5 van 16
5
ATTENTION:
• If the HCT101D will be installed into fine furniture, it is best to hire a licenced, bonded craftsperson to cut the access
hole and perform the physical installation so the surface will not be damaged.
• S’il est prévu d’installer le HCT101D dans du beau mobilier, il est préférable de faire appel à un artisan autorisé et
qualifié pour couper le trou d’accès et réaliser l’installation de telle façon que la surface ne soit pas endommagée.
• Follow all national and local building and electrical codes that apply to the installation site.
• Respectez tous les codes électriques et du bâtiment, nationaux et locaux, qui s’appliquent au site de l’installation.
• For the installation to meet UL requirements and to comply with National Electrical Code (NEC), the HCT101D must be
installed in a ULListed junction box. The end user or installer must furnish the junction box. It is not included with the unit.
• Pour que l’installation respecte les exigences UL et soit conforme au National Electrical Code (NEC) américain, le
HCT101D doit être installé dans une boîte de dérivation certifiée UL. Il incombe à l’utilisateur final ou à l’installateur de
fournir la boîte de dérivation. Cet équipement n’est pas inclus avec l’unité.
Americans with Disabilities Act (ADA) compliance
When planning where to install the HC system, you may need to consider factors affecting accessibility of the units such as height
from the floor, distance from obstructions, and how far a user must reach to press the buttons or insert a cable. For guidelines,
see sections 307 (“Protruding Objects”) and 308 (“Reach Ranges”) of the 2010 ADA Standards for Accessible Design available at
http://www.ada.gov/regs2010/2010ADAStandards/2010ADAStandards.pdf.
Site preparation
Each HCT101D fits a standard US one-gang junction box or mud ring
and decorator-style wallplate. Each unit ships with a mud ring.
Optional ULListed junction boxes, external junction boxes, and
surface mounting boxes are available for use with the unit. Read
any installation instructions and UL guidelines that come with the
mounting devices, then install the box or mud ring in the opening
at the installation site.
To prepare the site:
1. Using the size of the junction box or mud ring for reference,
cut the hole in the mounting surface. Protect the surface prior
to and during cutting so the surface is not damaged.
2. Run cables to the mounting location, leaving enough slack for
device installation.
3. Install the junction box or mud ring into the wall or furniture.
4. Secure the cables with a clamp for strain relief and so they do
not slip back down into the wall or furniture.
Step 3 — Connect AV, Interconnection, and Control Cables
1. Connect AV sources to the input connectors (see AV Inputs on page9).
2. Use a shielded twisted pair cable to connect the transmitter to the receiver via the Output and Input RJ-45 connectors (see
Transmitter-Receiver Interconnection on page10).
3. Connect AV output devices (display, projector, or other device, and an amplifier or powered speakers) to the output
connectors (see AV Outputs on page10).
4. If applicable, use Extron Show Me cables for controlling and indicating input selection (see instructions for the Remote
connectors in Control on page11).
5. Cable the control ports on the receiver as desired for controlling AV devices and for communicating with the system via LAN
(see Control).
Step 4 — Connect Power
Connect the power supply or power supplies to the HC400 Series system (see Power on page12), connect power cords, and
power on all the devices.
NOTE: The power supplies can be set on a tabletop, or mounted to a rack or furniture. Follow the mounting directions
included with each power supply or see the power supply installation guides available on the PS Series Power Supplies
page on the Extron website.
Rev. B: Changed the
note to an Attention &
added French text, per
Homi A.
Wall
Mud Ring
Figure 6. Installing a Mud Ring
Bekijk gratis de handleiding van Extron HC 402, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Extron |
| Model | HC 402 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3565 MB |
