Extron FOXBOX Rx HDMI handleiding
Handleiding
Je bekijkt pagina 30 van 51
Command and Response Table for Transmitter SIS Commands (continued)
FOXBOX Tx/Rx HDMI • Remote Control 22
Command Function
SIS Command
(Host to Unit)
Response
(Unit to Host)
Additional description
Switch
mode (continued)
Show native EDID value
E
NEDID
} X$]
Show the native resolution of the
display connected to the receiver.
Import EDID
E
I
0EDID
}X%
EdidI
]
Audio Input Selection
Set input audio format
E
I
X^
AFMT
}
AfmtI
X^]
Sets the input audio format.
View input audio format
E
IAFMT
} X^]
View the input audio format setting.
Audio input gain and attenuation
NOTES:
• The set gain (G) and set attenuation (g) commands are case sensitive. The increment level, decrement level, and show level are not
case sensitive.
• When the controlling PC is connected to the receiver, the PowerCage FOX can perform this command only if the receiver-Tx-to-
transmitter-Rx fiber cable is connected. The unit returns the E14 error if the Rx fiber is not connected.
Set input audio gain to a +dB value
X&
G Aud
X*]
Set the input level to
X*
dB (gain).
Example:
2G
Aud+02.0
]
Set the input level to +2 dB (gain).
Set input audio attenuation to a -dB
value
X(
g Aud
X*]
Set the input level to
X*
dB
(attenuation).
Increment input level
+G
Aud
X*]
Increase the audio level by 1 dB.
Example:
+G
Aud+03.0
]
Increment the input level from +2 dB
to +3 dB.
Decrement input level
–G
Aud–01.0
]
Decrease the audio level from 0 dB to
–1 dB.
Show input level
G
X*]
Input reports as an HDCP authorized device
HDCP authorized device on
E
E1HDCP
}
HdcpE1
]
Set the transmitter as an HDCP
authorized device.
HDCP authorized device off
E
E0HDCP
}
HdcpE0
]
Set the transmitter as not an HDCP
authorized device.
View HDCP authorized device
status
E
EHDCP
} X1!]
Show HDCP authorized device status.
KEY:
X$
= Native resolution Resolution and rate in an easily-viewed format, such as “800x600@60Hz“
X%
= EDID record 128 or 256 bytes
X^
= Input Audio Format 0 = follow switch (default) 2 = force analog audio
1 = force digital audio 3 = Auto (digital if present, else analog
X&
= Audio gain adjustment range 00 to 10
X*
= Audio level adjustment range -18 to +10 (in 1.0 dB steps)
X(
= Audio attenuation adjustment range 00 to 18
X1)
= Enable or disable status 0 = off (down) or disable 1 = on (up) or enable
X1!
= HDCP authorized device 0 = off 1 = on (default)
Bekijk gratis de handleiding van Extron FOXBOX Rx HDMI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Extron |
| Model | FOXBOX Rx HDMI |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7241 MB |
