Extron FOX3 SR 301 handleiding
Handleiding
Je bekijkt pagina 52 van 58
FOX3SR 301 and FOX3SR311 Scaling Receivers • Internal Web Page 44
Network Panel
In the Network panel (see figure35,
4
on page42), view the MAC address, change the
device name, set the IP address, subnet mask, and DNS server for your FOX3 SR, or turn
DHCP On and Off.
To change the name:
1. Click EDIT in the Network panel. The
editable fields are displayed (see figure38).
2. Click in the Device Name/Hostname field
and enter the desired device name.
3. When finished editing, click SAVE to confirm
your changes or CANCEL to close the
window without making changes.
To set the IP addresses:
1. Click EDIT in the Network panel. The
editable fields are displayed
2. Edit the network settings as desired:
a. Click the DHCP switch to toggle DHCP
on and off. When DHCP is enabled (On),
the unit configures its IP address and
other network settings from the DHCP
server. The default is O.
b. To set the network fields: IP Address,
Subnet Mask, and DNS Server, click in
the desired field and enter the address.
3. When finished editing, click out of the field
and click SAVE to confirm your changes or
CANCEL to close the window without making
changes.
Figure 38. Network Panel
38
Bekijk gratis de handleiding van Extron FOX3 SR 301, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Extron |
| Model | FOX3 SR 301 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10927 MB |
