Extron FOX3 SR 301 handleiding
Handleiding
Je bekijkt pagina 22 van 58
FOX3SR 301 and FOX3SR311 Scaling Receivers • Operation 14
Menu Overview
In the on-screen menu, the product name is displayed at the top of the right column. The
active input and output resolutions are displayed in the bottom border. The on-screen menu
contains two submenus with various adjustable settings or device information (see the
Submenus table).
Submenus DEVICE INFO QUICK SETUP
Submenu Items Unit Name Output Rate
Firmware HDMI Format
Temperature Test Pattern
Input Factory Reset
Format
Signal
HDCP
Output
Format
Display
HDCP
Using the Menu Screens
To open the on-screen menu:
1. Connect a display device to the
HDMI output (see figure2 on
page5).
2. Press the MENU or ENTER button to
open the on-screen menu.
To navigate the on-screen menu:
1. Press the and buttons to
move through the submenus (left)
panel. The table on the previous
page shows the two submenus and
the items they contain.
2. Press ENTER or to select a
submenu and display its items in
the right panel.
3. Press the and buttons to
move the blue selection border to
the desired submenu item (see the
example at right).
Figure 11. On-screen Menu
4. Press ENTER to select the item.
5. Press the button to return to the list of submenus in the left panel.
To adjust the settings of a submenu item:
1. Navigate to a submenu item and press the ENTER or button to select the item.
2. Press the and buttons to adjust the setting or select a specific adjustable setting
within the selected submenu item.
If the selected submenu item has multiple adjustable settings, press the and
buttons to select a value.
11
Bekijk gratis de handleiding van Extron FOX3 SR 301, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Extron |
| Model | FOX3 SR 301 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10927 MB |
