Extron FOX Rx AV handleiding
Handleiding
Je bekijkt pagina 13 van 34
FOX Tx/Rx AV Rear Panel Connections
Figure 3 (below) shows the rear panel features of the FOX Tx AV. The FOX Rx AV rear panel is
identical.
FOX Tx AV
Y/VID
I
N
P
U
T
S
OVER FIBER REMOTE
RS-232
Tx Rx Tx Rx
AUDIO
LR
ALARM
12
R-Y
B-Y/C
S-VID
OPTICAL
POWER
12V
0.6A MAX
RxTx
AA
B
BCCDDEEFF
Figure 3. FOX Tx AV Rear Panel Features
A
Power input (see below)
D
RS-232 connections (see page 8)
B
Video connections (see page 7)
E
Alarm (see page 9)
C
Audio connections (see page 8)
F
Fiber optic cable connector (see page 9)
A
Power input — This 3.5 mm, 2-pole captive screw connector accepts 12 VDC from an
external power supply (provided).
NOTE: The FOX Tx/Rx AV does not have a remote powering feature. Both the transmitter
and the receiver require their own separate power supply.
1. Connect the captive screw connector from the power supply to the power receptacle.
12V
0.6A MAX
POWER
Power Receptacle
DC Power Cord
Captive Screw Connector
AC Power Cord
Ground
+12 VDC
External
Power Supply
(12 VDC, 1 A )
Power Supply
Output Cord
SECTION A–
A
Ridges
Smooth
AA
Figure 4. Power Input
Power supply voltage polarity is critical. Incorrect voltage polarity can damage the power
supply, the transmitter, the receiver, or all three. Identify the ground ( ) wire by the ridges
on the side of the cord (see figure 4).
2. Connect the AC power cord of the power supply unit to a 110 or 220 VAC electrical
source.
3. When the transmitter or receiver is getting power, the front panel LED shows an amber
light.
FOX Tx/Rx AV • Panel Features and Connections 5
Bekijk gratis de handleiding van Extron FOX Rx AV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Extron |
| Model | FOX Rx AV |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5900 MB |
