Extron FOX II T HD 4K handleiding
Handleiding
Je bekijkt pagina 26 van 41
Command and Response Table for SIS Commands (continued)
FOX II T HD 4K Transmitter • Remote Control 18
Command SIS Command
(host to unit)
Response
(unit to host)
Additional description
Video bit depth (HDMI loop-through)
Set video bit depth to auto
E
V0BITD
}
BitdV0
]
Follow the input bit depth.
Set video bit depth to 8-bit
E
V1BITD
}
BitdV1
]
Force 8-bit depth.
View video bit depth
E
VBITD
} X^]
Input reports as an HDCP authorized device
HDCP authorized device on
E
E1HDCP
}
HdcpE1
]
Set the transmitter as an HDCP-authorized device
(default).
HDCP authorized device off
E
E0HDCP
}
HdcpE0
]
Set the transmitter as not an HDCP-authorized
device.
View HDCP authorized device
status
E
EHDCP
} X%]
Show HDCP authorized device status.
HDCP mode
Set HDCP mode to auto
E
S0HDCP
}
HdcpS0
]
Follows input (default).
Set HDCP mode to on
E
S1HDCP
}
HdcpS1
]
View HDCP mode
E
SHDCP
} X&]
Digital output format (HDMI loop-through)
Set the format to auto
E
0VTPO
}
Vtpo0
]
Follows input (default).
Set the format to DVI
E
1VTPO
}
Vtpo1
]
Set the format to HDMI
E
2VTPO
}
Vtpo2
]
View format
E
VTPO
} X*]
Analog audio input gain and attenuation
NOTE: The set gain (G) and set attenuation (g) commands are case sensitive. The increment level, decrement level, and show level are
not case sensitive.
Set input audio gain to a +dB
value
X(
G Aud
X1)]
Set the input level to
X1)
dB (gain).
Example:
2G
Aud2
]
Set the input level to +2 dB (gain).
Set input audio attenuation to
a -dB value
X1!
g Aud
X1)]
Set the input level to
X1)
dB (attenuation).
Increment input level
+G
Aud
X1)]
Increase the audio level by 1 dB.
Example:
+G
Aud3
]
Increment the input level from +2 dB to +3 dB.
Decrement input level
–G
Aud
X1)]
Decrease the audio level by 1 dB.
Show input level
G
X1)]
Audio input format
NOTE: This command selects the audio input that is transmitted to the receiver.
Select auto
E
I0AFMT
}
AfmtI0
]
Transmit the digital audio embedded in the HDMI
input, if detected, otherwise transmit the analog audio.
Select digital audio
E
I1AFMT
}
AfmtI1
]
Transmit the digital audio embedded in the HDMI
input.
Select analog audio
E
I2AFMT
}
AfmtI2
]
Transmit the analog audio input.
Show audio selection
E
IAFMT
} X1@]
Show the selected format.
KEY: X% = On and off status 0 = off (disabled) 1 = on (enabled)
X^ = Video bit depth 0 = auto mode (default) 1 = 8-bit
X& =
HDCP Mode 0 = auto (default) 1 = on
X* =
Digital output format 0 = auto (default) 1 = DVI 2 = HDMI
X( = Audio gain adjustment range 00 to 24
X1) = Audio level adjustment range -18 to +24 (in 1 dB steps)
X1! = Audio attenuation adjustment range 00 to 18
X1@ = Audio input format
0 = auto (default)
2 = analog audio
1 = digital (embedded HDMI) audio
Bekijk gratis de handleiding van Extron FOX II T HD 4K, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Extron |
| Model | FOX II T HD 4K |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5917 MB |
