Extron EBP 105P handleiding
Handleiding
Je bekijkt pagina 4 van 14
4
eBUS
®
Button Panel EU and MK Series • Setup Guide (Continued)
Remove the rotary encoder knob
(VC1 models only)
The EBP VC1 EU and EBP VC1 MK have a rotary encoder
knob. Before replacing the buttons, remove the encoder, as
shown here.
1. EBP VC1 EU and EBP VC1 MK only: Turn the rotary
encoder knob (gure 3,
1
) to expose the hex screw
holding the knob in place (
2
).
2. Insert the provided 0.05 inch Allen wrench and turn the
wrench in the direction shown (
3
) to loosen the screw.
3. Pull the knob straight out to remove it.
Once the encoder knob is removed, removing the faceplate
and replacing the buttons is the same for all models.
MUTE
VOLUME
1
3
Turn Knob to
Expose Screw
Use Allen Wrenc
h
to Loosen Screw
2
Figure 3. Remove the Rotary Encoder (VC1 models only)
Remove the bezel (except the EBP 104 EU and
EBP 104 MK)
Insert the Extron pry tool into the gap between one side of the
bezel and the frame. Release the locking tab holding the bezel
to the metal mounting bracket (gure 4,
1
). There is a single
catch in the middle of each side. If necessary, use the pry tool
to release the second catch on the opposite side.
The frame is held in place by the bezel. When the bezel is
removed, the frame also comes away from the wall. Pull the
device and the frame away from the wall.
Extron
Extron
Insert
to line
.
VOLUME
DISPLAY
OFF
ON
LAPTOP
VIDEO
11
Figure 4. Release Bezel
Remove the bezel on the EBP 104 EU or
EBP 104 MK
The EBP 104EU and EBP 104MK have two locking tabs
at the top and two more at the bottom.
Insert the Extron pry tool between the top of the bezel
and the frame and slide it to the location of one of the
locking tabs (see gure 5,
1
). Pull the pry tool up so
that the locking tab is pressed down, which releases it
(
2
).
When the rst catch is released, slide the pry tool along
the gap between the bezel and the frame to release the
second catch.
If necessary, use the pry tool to release the catches on
the bottom of the bezel.
Tip the bezel forward and remove it (
3
). The frame is
held in place by the bezel. When the bezel is removed,
the frame will also come away from the wall. Pull the
device and the frame away from the wall.
MUTE
SOURCE
2
SOURCE
3
SOURCE
1
MUTE
SOURCE
2
SOURCE
3
SOURCE
1
MUTE
SOURCE
2
SOURCE
3
SOURCE
1
Pry Tool
Remove the
module.
At the locking tab
locations, insert the
pry tool up to the
line below the arrow.
Pull the pry tool to the
left to unhook each
locking tab from the
mounting bracket.
Locking
Tabs (2)
1
2
3
Figure 5. Release Bezel (EBP 104 EU or EBP 104 MK)
Bekijk gratis de handleiding van Extron EBP 105P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Extron |
| Model | EBP 105P |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3602 MB |
Caratteristiche Prodotto
| Kleur van het product | Black, White |
| Gewicht | 100 g |
| Breedte | 81 mm |
| Diepte | 13 mm |
| Hoogte | 81 mm |
