Extron DTP T USW 333 handleiding
Handleiding
Je bekijkt pagina 17 van 41
DTP T USW 333 • Installation and Operation 9
STP cable termination and recommendations
Figure 5 details the TIA/EIA T 568B wiring standard. Use this standard to terminate the DTP cable with RJ-45
connectors.
5
Pin
1
2
3
6
7
8
4
Side
12345678
Insert
Twisted
Pair Wires
Pins:
RJ-45
Connector
Wire color
White-green
Green
White-orange
White-blue
Orange
White-brown
Brown
Blue
TIA/EIA T
568B
Figure 5. STP Cable Termination
ATTENTION: Do not use Extron UTP23SF-4 Enhanced Skew-Free AV UTP cable or STP201 cable to link
the switching transmitter and receiver. The DTP T USW 333 does not work properly with these cables.
N’utilisez pas le câble AV Skew-Free UTP version améliorée UTP23SF d’Extron ou le câble STP201 pour
relier les produits XTP avec les émetteurs ou les récepteurs DTP.
Supported cables
The DTP T USW 333 is compatible with shielded twisted pair (STP) and unshielded twisted pair (U/UTP) cable.
However, Extron strongly recommends that you use STP cable to achieve best performance.
Cable recommendations
Extron recommends using the following practices to achieve full transmission distances up to 330 feet (100
meters) and reduce transmission errors.
• Use the following Extron XTP DTP 24 STP cables and DTP 24 connectors for the best performance:
• XTP DTP 24/1000 Non-Plenum 1000 feet (305 meters) spool
• XTP DTP 24P/1000 Plenum 1000 feet (305 meters) spool
• XTP DTP 24 Plug Package of 10
• If not using XTP DTP 24 cable, at a minimum, Extron recommends 24 AWG, solid conductor, STP cable with
a minimum bandwidth of 400 MHz.
• Terminate cables with shielded connectors to the TIA/EIA-T568B standard.
• Use no more than two pass-through points, which may include patch points, punch down connectors,
couplers, and power injectors. If these pass-through points are required, use Catagory 6 or 6a shielded
couplers and punch down connectors.
NOTE: When using STP cable in bundles or conduits, consider the following:
• Do not exceed 40% fill capacity in conduits.
• Do not comb the cable for the first 20 meters, where cables are straightened, aligned, and secured in
tight bundles.
• Loosely place cables and limit the use of tie wraps or hook-and-loop fasteners.
• Separate twisted pair cables from AC power cables.
5
Bekijk gratis de handleiding van Extron DTP T USW 333, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Extron |
| Model | DTP T USW 333 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7629 MB |
