Extron DA4 12G HD-SDI handleiding

31 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 9 van 31
Introduction
This guide describes the function, installation, and operation of the DA412GHD‑SDI.
Unless otherwise stated, the terms “distribution amplifier” and “DA” refer to the
DA412GHD‑SDI.
This section provides the following information:
About the DA412GHD-SDI
Features
Application Diagram
About the DA412GHD‑SDI
The Extron DA412GHD‑SDI distributes one HD‑SDI input signal with embedded audio,
closed caption and time code to up to four simultaneous outputs. It can handle data rates
from 270 Mbps to 11.88 Gbps. The DA also features automatic input cable equalization and
output signal reclocking to compensate for signal degradation in long cable runs.
The distribution amplifier conforms to SMPTE ST‑2082 and is compatible with any of the
Extron HD‑SDI switchers, equalizers, matrix, and other HD‑SDI products that support data
rates up to 12G‑SDI. Front panel LEDs provide immediate confirmation of active signal
presence.
The distribution amplifier is housed in a 1 inch (25 mm) tall, quarter rack wide, and 3 inches
(72 mm) deep metal enclosure. The DA can be placed in a convenient location, mounted on
a rack shelf, or under a desk (see Mounting on page21).
Features
12G-SDI signal distribution — Distributes multi‑rate SDI signals of data rates from
one SDI input through a female BNC connector and provides up to four simultaneous
outputs.
Automatically adapts to SMPTE and ITU digital video standards for SDI signals
up to a 12G-SDI data rate.
Supports data rates from 270 Mbps to 11.88 Gbps.
Automatic input equalization — Compensates for attenuation and distortion on
the incoming signal and automatically equalizes cables at distances up to 230 feet
(70 meters) for 12G‑SDI signals, 787 feet (240 meters) for HD SDI, and 984 feet
(300meters) for SDI.
Automatic output reclocking — Reshapes and restores timing of digital video
signals at output, eliminating high frequency jitter and provides AV system designers
with additional headroom when connecting multiple devices. Reclocking can also be
selected per output or bypassed.
Input rate LEDs — Convenient front panel indicators allow visual confirmation
of 12G‑SDI, 6G‑SDI, 3G‑SDI, HD‑SDI, and SDI input data rates for quick, visual
identification of the incoming digital video signal.
SMPTE ST-2082 compliant.
DA4 12G HD-SDI • Introduction 1

Bekijk gratis de handleiding van Extron DA4 12G HD-SDI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkExtron
ModelDA4 12G HD-SDI
CategorieNiet gecategoriseerd
TaalNederlands
Grootte5180 MB