Extron Cable Cubby F55 handleiding
Handleiding
Je bekijkt pagina 4 van 12
4
Snap the grommet plate
into the Adapter Module.
b
b
b
Snap included grommet plugs
into any unused holes in the
grommet plate.
d
Install the cable grommet plate for cable pass-through applications.
For cable pass-through installation,
insert the cables through the bottom
of the Cable Cubby F55, through the
Cable Cubby F55 Adapter Module, and
then through the holes of the gr
ommet plate.
a
a
a
2
Align the adapter module with
an opening in the Cable Cubby F55
frame and then snap it into place
in the enclosure.
c
Figure 4. Setting Up the Cable Grommet Plate
Plug in any additional
devices here.
Connect to
power source.
USB CHA RGER
~
120V
50-60 Hz 6A MA X
3
3
3
Feed the cables through the
Cable Cubby F55 enclosure
for the Flex55 and EU modules
being installed. Attach the
cables to the modules before
snapping the modules into place.
4
4
4
Insert the modules (in this
example, the double-size
Flex55 AC+USB 130 US),
into the opening and snap
them into the frame.
Figure 5. Installing Flex55 and EU Modules into the Cable Cubby F55 Enclosure
4
Bekijk gratis de handleiding van Extron Cable Cubby F55, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Extron |
| Model | Cable Cubby F55 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2893 MB |
