EXSYS EX-47040P handleiding
Handleiding
Je bekijkt pagina 7 van 12
8S RS232/422/485 PCI/PCIe Expansion Module
7
7. If you are connecting a RS232 device to the Module Box, then the DB9
male connectors are required. The RS232 mode does not need any
extra DIP switch settings, simply connect to the DB9 connector and
leave all 7-pin Terminal Blocks unconnected. The RS232 mode is not set
by DIP switches. Instead, it is automatically configured.
8. Turn ON the power of the PC system and proceed with software driver
installation.
9. The connection is explained as the following diagram:
Module Box
DB44 Cable
PCIe Host Card
in the PC System
Connect power input to the 4-pin
or 15-pin SATA power connector
Bekijk gratis de handleiding van EXSYS EX-47040P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | EXSYS |
| Model | EX-47040P |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2912 MB |
Caratteristiche Prodotto
| Gewicht | 1200 g |
| Breedte | 226 mm |
| Diepte | 74 mm |
| Hoogte | 20 mm |
| Soort serieële aansluiting | RS-232/422/485 |
