Explore Scientific WSH4102 handleiding
Handleiding
Je bekijkt pagina 23 van 96
23
EN
Signal strength of wireless
sensor channel
No signal Weak signal Good signal
2. If the signal has discontinued and does not recover within 15 minutes, the signal icon will
disappear. The temperature and humidity will display “Er” for the corresponding channel.
3. If the signal does not recover within 48 hours, the “Er” display will become permanent. You
need to replace the batteries and then press [ SENSOR / WI-FI] key to pair up the sensor
again.
VIEW THE OTHER CHANNELS (OPTIONAL FEATURE WITH ADD ON EXTRA SENSORS)
This console is capable to pair with 7 wireless sensors. If you have 2 or more wireless sensors, you can
press [ CHANNEL ] key to switch between different wireless channels in normal mode, or press and hold [
CHANNEL ] key for 2 seconds to toggle auto-cycle mode to display the connected channels at 4 seconds
interval.
During auto-cycle mode, the icon will show on the wireless sensor channels section of the console's
display. Press [ CHANNEL ] key to stop auto cycle and display the current channel.
TEMPERATURE / HUMIDITY FUNCTION
- The temperature and humidity reading are display on the Channel and indoor section.
- Use the [ °C / °F ] key to select the temperature display unit.
- If temperature / humidity is below the measurement range, the reading will show “LO”. If
temperature / humidity is above the measurement range, the reading will show “HI”.
COMFORT INDICATION
Bekijk gratis de handleiding van Explore Scientific WSH4102, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Explore Scientific |
| Model | WSH4102 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7331 MB |
Caratteristiche Prodotto
| Kleur van het product | Wit |
| Ingebouwd display | Ja |
| Breedte | 130 mm |
| Diepte | 112 mm |
| Hoogte | 27.5 mm |
