Handleiding
Je bekijkt pagina 39 van 72
NLFR EN
39
humidity.
The fan speed will remain low while the temperature and humidity level of the room will only change gradually to guarantee
In AIR-CONDITIONER mode, the selected temperature will increase by 1°C per hour over a period of 2 hours. This new
This timer can be used to set the appliance to switch on or off at a chosen time. This will allow you save on power consumption
example.
several times until amount of time you want is displayed. Wait for around 5 seconds, then the timer will be
To cancel the programme that has been set, press the button again or press the button. The symbol will
Setting the appliance to switch off
• When the appliance is operating, press the
button. The screen will display 1-24 hours and the , and symbols
willashtogether(Fig.9)
• Press the button several times until the time you want is displayed. Wait for around 5 seconds, then the timer will be
activated and only the
symbol will be displayed on the screen (Fig. 10).
• To cancel the programme, press the
button again or press the button. The symbol will disappear from the
screen.
CHANGE UNIT OF TEMPERATURE
When the appliance is in standby mode, press the button for 20 seconds. You can then change the unit of temperature.
Fig. 12 Fig. 13
Beforemodication,inColdmode,thescreenwillappearasinFig.12.
Aftermodication,inColdmode,thescreenwillappearasinFig.13.
Manual_Snowair7C-9C-9CP-12C-12CP_2021.indd 39Manual_Snowair7C-9C-9CP-12C-12CP_2021.indd 39 25/01/21 11:3325/01/21 11:33
Bekijk gratis de handleiding van EWT SNOWAIR12CP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | EWT |
| Model | SNOWAIR12CP |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 10246 MB |
