EWT SNOWAIR12CP handleiding

Handleiding

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172/ 72

Afdrukken

Je bekijkt pagina 38 van 72

NLFR EN

38

OSCILLATION

Thisfunctionisusefulforselectingtheangleoroscillationmodeofthedeector:airowupwardsordownwards

Positionofthedeectorinoscillationmode

To set this option correctly:

•Selectusemode(air-conditioner,dehumidier,fan)asdescribedabove.

• Then press the

buttonontheremotecontroltosetautomaticoscillationbythedeector

NIGHT MODE

This function is useful during the night as it reduces the appliance’s power consumption.

To set this function correctly:

• Selecttheair-conditionerordehumidiermodeasdescribedabove.

• Press the

.button.

• The appliance will function in the mode previously selected.

• When you select night mode, the brightness of the screen is reduced.

Nightmodeallowsyoutomaintainaconstanttemperatureinaroomwithoutmajoructuationsintemperatureorhumidity.

The fan speed will remain low while the temperature and humidity level of the room will only change gradually to guarantee

the highest possible level of comfort.

In AIR-CONDITIONER mode, the selected temperature will increase by 1°C per hour over a period of 2 hours. This new

temperature level will then be maintained for the following 6 hours. The appliance will then switch itself off.

NIGHT mode can also be cancelled at any time during use by pressing the

or or buttons.

In FAN mode, the NIGHT function cannot be set.

PROGRAMMING

Setting the timer

This timer can be used to set the appliance to switch on or off at a chosen time. This will allow you save on power consumption

by optimising the periods when it is in use.

Setting the appliance to switch on

• Switch the appliance on.

• Choosethemodeyouwanttouse,suchasAIR-CONDITIONERmodesetto24°Catmaximumfanspeed,forexample.

• Then switch the appliance off.

• Press the

button. The screen will display 1-24 hours and the , and willashtogether(Fig.7).

• Press

several times until amount of time you want is displayed. Wait for around 5 seconds, then the timer will be

activated and only the

symbol will be displayed on the screen (Fig. 8).

• To cancel the programme that has been set, press the button

again or press the button. The symbol will

disappear from the screen.

Setting the appliance to switch off

• When the appliance is operating, press the button. The screen will display 1-24 hours and the

will

• Press the button several times until the time you want is displayed. Wait for around 5 seconds, then the timer will be

activated and only the symbol will be displayed on the screen (Fig. 10).

• To cancel the programme, press the button again or press the button. The symbol will disappear from the

screen.

CHANGE UNIT OF TEMPERATURE

When the appliance is in standby mode, press the button for 20 seconds. You can then change the unit of temperature.

Before

Aftermodication,

Manual_Snowair7C-9C-9CP-12C-12CP_2021.indd 38Manual_Snowair7C-9C-9CP-12C-12CP_2021.indd 38 25/01/21 11:3325/01/21 11:33

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172/ 72

Bekijk gratis de handleiding van EWT SNOWAIR12CP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Gerelateerde producten van EWT (Airco)

Handleiding bekijken

EWT SNOWAIR12HEP

Airco - handleiding

Andere merken in Airco