Handleiding
Je bekijkt pagina 26 van 29
KC Prime
26
Print-head servicing
1. Take an Evolis High Trust® cotton swab and press the middle of the tube until the end of the swab is soaked in alcohol.
2. Open the cover and locate the print head.
3. Gently rub the swab from left to right along the print head for a few seconds. When the cleaning cycle is over, wait 2 minutes before using the
printer to let the alcohol evaporate.
4. Close the cover.
Maintenance of the dust filter
·
The dust filter is located above the ventilator for the print head.
·
Recommended cleaning cycle: once a year or after 10,000 cards, depending on your work environment.
1. Open the printer cover and remove the filter by pulling it up and sliding to release it completely.
2. Once the filter is removed from its place, take one of the cleaning wipes and clean the filter by wiping each side of it.
Bekijk gratis de handleiding van Evolis KC Prime, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Evolis |
| Model | KC Prime |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 6139 MB |
