Eventide H9000 Madi handleiding
Handleiding
Je bekijkt pagina 19 van 140
Clock Status
The right-hand side of the screen displays the status of various clocks, as follows:
Clock Status: The large virtual LED illuminates GREEN when the H9000 is locked to either its internal
clock, or a valid external clock that you have selected for it to sync to. The LED illuminates RED if the
H9000 is not locked. For example, if you have selected an external clock source that hasn’t been
connected.
USB Driver: The large virtual LED illuminates GREEN when the H9000 has a valid USB connecon to an
aached computer and will display “aached.” The LED illuminates RED if the H9000 has no valid USB
connecon and will display “detached.”
Sample Rate: This field displays the actual sample rate at which H9000 is operang.
Note
The H9000 does not support sample rate conversion. If you want to feed the H9000 a digital audio
signal, the external digital signal and the H9000 must both be locked to the same digital clock, at
the same sample rate.
Word Clock Terminaon Status
Sets the internal word clock terminaon to be enabled or disabled.
Set this to “enabled” if the H9000 is at the end of a word clock chain.
Set this to “disabled” if the H9000 is in the middle of a word clock chain and a BNC T is being used.
Warning
Use a 75 ohm BNC cable. 50 ohm BNC cables may cause clocking issues.
•
•
•
•
•
2. SETUP
19
Bekijk gratis de handleiding van Eventide H9000 Madi, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eventide |
| Model | H9000 Madi |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16632 MB |
