Eventide H9000 Madi handleiding
Handleiding
Je bekijkt pagina 18 van 140
Clock Source
The clock source is the digital audio clock to which your H9000 synchronizes. You can select an internal
clock at one of the sample rates listed below:
44.1 kHz
48 kHz
88.2 kHz
96 kHz
Alternavely, you can synchronize your H9000’s system clock to an external clock signal derived from
addional sources:
AES Any (any AES signal feeding the DB-25 connector)
S/PDIF/XLR/AES in 1 (Dig 1-2)
AES In 2 (Dig 3-4)
AES In 3 (Dig 5/6)
AES in 4 (Dig 7/8)
ADAT
Word Clock
Expansion A/B/C
To adjust the clock source:
Use the cursor keys to highlight the clock source seng.
Press the Enter buon or adjust the wheel to reveal up a popup menu with available choices for that
seng.
Use the cursor up/down buons or wheel to select your desired choice.
Press the enter key again to select that choice.
Digital Audio Mode
The H9000 contains several different digital audio connectors. They are “shared” as an input source to the
H9000; you choose which one you wish to make acve. The Digital Audio Mode menu is where this
selecon is made. Use the Digital Audio mode selector to pick your preferred connector, which will then be
available in the audio roung menus of the H9000. Available choices include:
AES 3 (DB-25 Connector)
AES 3 (XLR Connector)
S/PDIF (RCA Connector)
S/PDIF (Opcal Connector)
ADAT (Opcal Connector)
By contrast, for the outputs, the same signal is “multed” to all of the digital audio output connectors
simultaneously.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
18
2. SETUP
Bekijk gratis de handleiding van Eventide H9000 Madi, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eventide |
| Model | H9000 Madi |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16632 MB |
